Gel Time Tester is now possible with glass fiber prepreg, carbon fiber prepreg, etc. in sheet form.
  • Outline
  • Specifications
  • Gel time measurement is available for ultra-thin prepreg sheets, carbon fiber prepreg sheets, etc., which have been difficult to measure up to now, in sheet form. Of course, liquid and powder measurements are also possible.
  • Gel time measurement of various resins such as thermosetting resins, two-component curing resins, moisture curing resins, and room temperature curing resins is possible.
    Epoxy, silicone, urethane, phenol, unsaturated polyester, PVC, furan resin, acrylic resin, prepreg, semiconductor encapsulant, adhesive, friction material, sealant, paint, etc.
  • The measurement results are reproducible and highly reliable.
  • Model: SZK model
  • Hot plate temperature setting: room temperature to 240°C
  • Continuous measurement time: 3600 seconds (1 hour)
  • Dimensions: 410mm(W)×630mm(H)×390mm(D)
  • Weight: Approx. 42 kg
  • Power supply voltage: AC100V±10% 50/60Hz 3A MAX
  • Power consumption: 300W max.

Specifications are subject to change without notice.

  • Direct measurement of sheet materials, no need to powder PCB prepreg
    Directly measures PCB prepreg, carbon prepreg, etc. RCC (Resin Coated Copper) can also be measured.
  • Measurement of thin to thick materials in a single sheet.
    10um ultra-thin prepreg to thick non-woven fabrics can be measured.
  • Measurement of powder and liquid samples that were difficult to measure with the stirring torque method.
    Supports a wide range of samples, including samples with highly filled filler, anaerobic samples, and jelly-like samples.
  • Visualization of hardening behavior in graphs.
    Viscosity, phase difference, shear modulus, etc. are calculated and graphed from the measured stress.
  • Viscoelasticity Measurement of Fluids
    Rheology measurement of non-Newtonian fluids, such as samples that do not harden, is also possible.
  • Stress, viscosity, and phase data can be check.

Advanced Technology Division

Opening hours are from 9:00 to 17:30 every weekday.